1 starting the ip-gw4 maintenance utility – Panasonic KX-TDA0484 User Manual
Page 4
1.1 Starting the IP-GW4 Maintenance Utility
4
Programming Guide
1.1
Starting the IP-GW4 Maintenance Utility
There are 2 different log-in levels to the IP-GW4 Maintenance Utility, a web programming utility for
the VoIP Gateway Card: Administrator level and Installer level. These levels provide different
programming options.
For full discussions of Administrator-level programming and Installer-level programming, refer to "2
Administrator Functions" and "3 Installer Functions", respectively.
System Requirements
•
The IP-GW4 Maintenance Utility requires Microsoft® Internet Explorer 5.0 or above.
Trademarks
•
Microsoft is either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.
•
All other trademarks identified herein are the property of their respective owners.
•
Screen shots reprinted with permission from Microsoft Corporation.
1.
Run Internet Explorer from the Start menu.
2.
In the Address box of Internet Explorer, type http://192.168.1.200.
192.168.1.200 is the default IP address of the VoIP Gateway Card.
3.
Press the ENTER key on the keyboard.
4.
In the Username box, type the user name.
•
Default Administrator-level user name: Administrator
•
Default Installer-level user name: Installer
5.
In the Password box, type the password.
•
Default Administrator-level password: Administrator
•
Default Installer-level password: Installer
6.
Click LOGIN.
To clear your entry, click CLEAR.