Panasonic CQ-C8803N - Manual (Page 11)

CQ-C8803N
English
11
Notes:
¡ Adjust the clock when “NO CT” appears on the dis-
play.
¡ When a broadcast of FM Radio Data System is
received, the clock is put right automatically by the
Clock Time service. (
a page 22)
1
Press [MENU] to display the menu
display.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
Press [ { ] to select “CLOCK ADJ”.
4
Press [BAND] (SET) to confirm the
display.
5
Adjust the setting value.
[[] : Adjusting minutes
[]] : Adjusting hours
[ } ] : Forward
[ { ] : Backward
6
Press [BAND] (SET) to confirm the
adjustment.
7
Press [MENU].
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
You may need to set the following depending on the
devices to be connected.
Using Subwoofer
¡ Subwoofer level adjustment ( a page 33)
¡ Subwoofer low pass filter ( a page 33)
Connecting an AV device (TV, VTR)
If you connect TV to AUX1 terminal, set the AUX1 setting
to TV.
1
Press [SRC] (SOURCE) to select the
AUX1 mode. ( a page 14)
2
Press [MENU] to display the menu display.
For using the remote control, hold down [MENU]
for 2 sec. or more.
3
Press [BAND] (SET) to adjust.
: For connection of other than a TV (default)
: For connection of a TV
4
Press [MENU] to confirm the adjust-
ment.
The following functions are activated when the Security
Function is ON. (
a page 34)
¡ The security indicator lights up when removing the
face plate.
¡ The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off. (The above phenomenon occurs when the ACC
setting of the unit is set to ON at the ignition key is at
the ACC off position or when the ACC setting of the
unit is set to OFF at the power of the unit is off)
Security Indicator
Preparation
Security Function
Setting
For a ACC-equipped car, select ON. ( a page 34) The
following functions are available. (default: off)
¡ The power is turned on automatically when inserting a
disc.
¡ The clock can be displayed even if the power is off.
(
a page 15)
Caution
Be sure to select OFF when
your car has no ACC
position in the ignition
switch. Failure to do this
could cause the battery to
go dead.
ACC Setting
Clock adjustment
Other Settings
OFF
ACC
IGN