English, Sound control, Sq selection based on genre – Panasonic CQ-C8803N User Manual
Page 17: Sq adjustment, Sq changeover, Sq adjustment (sq9), Position
CQ-C8803N
17
English
Sound Control
The equalizer curve is selectable from among preset 6
types (FLAT, ROCK, POP, VOCAL, JAZZ, and CLUB)
depending on your listening category.
Note: SQ is not changeable when CS AUTO is enabled.
(
a
page 16)
SQ changeover
The SQ category is changed every time [SQ] (SOUND
QUALITY) is pressed.
Note: Setting of SQ, bass/treble and volume are
influenced one another. If the influence mentioned above
causes distortion to the audio signal, readjust bass/treble
or volume. (
a
page 33)
Lights when SQ is activated.
SQ is adjustable in accordance with your taste.
1
Hold down [SQ]
(SOUND QUALITY)
for 2 sec. or more
when CS AUTO is dis-
abled.
2
Press [
}
] or [
{
] to select a function to
be adjusted.
3
Press [BAND]
(SET) to adjust.
4
Adjust the setting value.
5
Press [D] (DISP: DISPLAY) to confirm
the adjustment.
SQ ADJUSTMENT (SQ9)
(Band: 62.5, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, and 16 kHz
(default), Setting range: –12 dB to 12 dB, in 2 dB steps)
You can make a fine adjustment to the currently selected
SQ presetting in each type.
[
]
][
[
]:
Frequency band selection
qw:
Frequency selection
[
}
][
{
]: Level up/down
Note: If you hold down [BAND] for 2 sec. or more, the
presetting that is called up can be turned into the default.
POSITION
You can make the optimal sound field in accordance with
your seat.
[
]
][
[
]:
Selection
(
): Disabled (default)
(
): Right side of front seat
(
): Left side of front seat
(
): Both sides of front seat
(
): Both sides of rear seat
CQ-C8803N
TA
DISP
PTY
D M
CQ-C8803N
TA
D M
SQ Selection Based on Genre
(SQ: SOUND QUALITY)
SQ adjustment
(USER)
DISP
PTY