Paxar Gold 6037EX - Manual (Page 117)

Function Reference 4-81
Example
#include <stdio.h>
#include "scan1223.h"
#include "mmsultra.h"
void main(void)
{
short sStatus = 0; // Command calls config.
LPCODE93INFO config93; // Code 93 data structure
sStatus = scnOpenScanner(); // Enable scanner
if (sStatus == -2)
printf("Scanner error-- %d", sStatus);
else
{ // Get config.
sStatus = scnGetCode93Info(config93);
if (sStatus != 0)
printf("Scanner is disabled.");
else
{ // Set values
config93->uchEnable = SCN_ENABLE;
config93->uchLength1 = 0;
config93->uchLength2 = 0;
// Save values
status = scnSetCode93Info(config93);
if (sStatus != 0)
printf("Error setting values-- ", sStatus);
else
; /* Scan Bar Codes */
}
}
sStatus = scnCloseScanner(); // Disable scanner
}