Adjusting the print position – Paxar 9400 User Manual

Page 48

Advertising
background image

4. Now you can either:

Type I and press

E

to move the cut up.

You’ll see

Amount of Cut increase
[0-144]: 0___(Dots)

Enter a number form 0-144 for the amount of space to
move the cut and press

E

. For example, 10 moves

the cut .052 inches (there are .0052" per dot). The screen
then shows the Print Option menu.

Type D and press

E

to move the cut down.

You’ll see

Amount of Cut decrease
[0-144]: 0__(Dots)

Enter a number from 0-144 for the amount of space to
move the cut and press

E

. The screen then shows

the Print Option menu.

5. Select another print option, or press

!

to exit to the main

menu.

Adjusting the Print Position

This feature adjusts where the data prints on the supply. It is
only for slight adjustments. For example:

•

If the data overlaps the preprint on the supply, enter
steps to move the printing down.

•

If the data is too close to the bottom, enter steps to
move the data up.

9400 Series Operator’s Handbook

5-4

Advertising