Part identification chart – ProForm PFANBE3525.0 User Manual

Page 20

Advertising
background image

M8 Nylon Locknut (78)

M10 Nylon Locknut (77)

M6 Washer (81)

M8 Washer (83)

M4 Washer (84)

M10 Washer (80)

M10 x 82mm Button Bolt (93)

M10 x 87mm Button Bolt (94)

M8 x 53mm Bolt (9)

M8 x 20mm Button Screw (16)

M8 x 10mm Set Screw (62)

M6 x 63mm Button Screw (92)

M6 x 15mm Button Screw (17)

M4 x 16mm Self-tapping Screw (91)

M10 x 50mm Bolt (79)

M10 x 45mm Bolt (75)

M10 x 82mm Bolt (85)

M10 x 78mm Bolt (87)

M10 x 67mm Bolt (86)

M10 x 20mm Bolt (89)

M10 x 25mm Bolt (88)

M10 x 63mm Button Bolt (90)

M10 x 58mm Button Bolt (95)

M10 x 100mm Screw (26)

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual.

Note: Some small parts

may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

Advertising