ProForm PFANBE3525.0 - Manual (Page 9)

9
11. Attach the Left Rack Base (37) to the Center
Rack Base (39) with two M10 x 67mm Bolts (86),
an M10 Washer (80), and an M10 Nylon Locknut
(77).
Do not tighten the Bolts.
Repeat this step with the Right Rack Base (38).
13. Attach the Foot Plate (49) and the Rear Rack
Base (40) to the Center Rack Base (39) with two
M10 x 63mm Button Bolts (90) and two M10
Nylon Locknuts (77).
Do not tighten the
Locknuts.
Attach the Foot Plate (49) to the Center Rack
Base (39) with an M10 x 63mm Button Bolt (90),
an M10 Washer (80), and an M10 Nylon Locknut
(77).
Do not tighten the Locknut.
12. Attach the Rear Rack Base (40) to the Rear
Upright (41) with two M10 x 67mm Bolts (86), two
M10 Washers (80), and an M10 Nylon Locknut
(77).
Do not tighten the Bolts.
39
86
80
11
12
37
38
77
80
77
86
41
40
13
90
49
39
80 77
77
40