Planet Technology XRT-411 - Manual (Page 14)

Broadband Router User Guide
10
If you can't connect
If the Broadband Router does not respond, check the following:
•
The Broadband Router is properly installed, LAN connection is OK, and
it is powered ON. You can test the connection by using the "Ping" com-
mand:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or
your PC's IP address is not compatible with the Broadband Router's
IP Address. (See next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the
range 192.168.0.2 to 192.168.0.254 to be compatible with the Broad-
band Router's default IP Address of 192.168.0.1. Also, the Network
Mask must be set to 255.255.255.0. See Chapter 4 - PC Configuration
for details on checking your PC's TCP/IP settings.
•
Ensure that your PC and the Broadband Router are on the same net-
work segment. (If you don't have a router, this must be the case.)