5 confirming filter replacement, 6 replacing the uv lamp unit, 7 cleaning and maintenance – Philips WP3891 User Manual

Page 12

Advertising
background image

1

7 Cleaning and

maintenance

7.0.1 Cleaning the pure water dispenser

B

Warning:

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as petrol or

acetone to clean the appliance.

B

Warning:

Do not pour water over the pure water

dispenser.

1

Clean the outside of the pure water

dispenser regularly with a damp (not wet)

cloth.

2

If you have not used the appliance for 2 days

or more, perform the PureFlush procedure

(see chapter ‘Using the appliance’, section

‘PureFlush’).

7.0.2 Cleaning the macro filter

1

Switch off the pure water dispenser.

2

Turn off the water supply to the pure water

dispenser.

3

Unscrew the water inlet connector (hold it

in vertical position to avoid water spillage)

and pull out the macro filter.

4

Rinse the macro filter under a running tap.

Remove the dirt from the mesh.

5

Put the macro filter back in its original

position.

6

Reattach the water inlet connector.

6.1.2 PureFlush

Use the PureFlush function when you use the

appliance for the first time. Also use the PureFlush

function if you have not used the appliance for

more than  days:

When you replace the filter, the pure water

dispenser performs the Pure Flush function

automatically. In this case, 10 litres of water flow

out of the appliance (see chapter ‘Cleaning and

maintenance’, section ‘Replacement’).

B

Warning:

Do not drink the water that comes out of the

appliance during the PureFlush procedure.

1

Switch on the pure water dispenser.

Wait until the dispense button d flashes

(ready to dispense - manual mode).

2

Place a container with a capacity of at least

10 litres under the pure water dispenser.

3

Press and hold the dispense button d for 4

seconds.

The PureFlush procedure starts, during

which 10 litres of water come out of the

appliance.

The dispense button lights up green to

indicate that Pure Flush is in progress.

All other indicators are off.

D

Note:

If you want to cancel the flushing procedure

while it is in progress, press the power-on

button y to switch off the pure water dispenser.

Advertising