4 preparing for use, 1 installation, 1 display panel description – Philips WP3891 User Manual

Page 6: 5 features

Advertising
background image



all parts back according to the instructions

in this user manual.

Do not forget to clamp the tube that

connects the pure water dispenser to the

tap. Improper clamping of the tube may lead

to leakage.

3.0.4 Compliance with standards

This Philips pure water dispenser conforms to

the highest standards for contaminant reduction,

structural integrity and material safety. it thus

ensures that pure water is made easy - always. The

following certifications are a proof of that.

This Philips appliance complies with all

standards regarding electromagnetic fields

(EMF). If handled properly and according

to the instructions in this user manual, the

appliance is safe to use based on scientific

evidence available today.

This Philips pure water dispenser conforms

to NSF/ANSI 42 for removal of chlorine

and particulates. It removes all classes of

particulates from Class I until Class VI

– particle size 0.5µm to 80 µm).

This Philips pure water dispenser conforms

to NSF/ANSI 53 for the removal of turbidity

and volatile organic chemicals (VOCs) and

cysts (single-celled parasites).

This Philips pure water dispenser conforms

to NSF/ANSI 55 Class A protocol (2004)

for the disinfection of microbiologically

contaminated water that meets all other

public health standards. Tested by Kiwa

Water Research, the Netherlands.

This Philips pure water dispenser has been

awarded the Gold Seal by the WQA (Water

Store the filtered water in properly closed

and clean containers for not more than 48

hours.

Do not store the water in a water pot

(matkas) or a candle filter, as this can

recontaminate the water.

Always buy original Philips replacement

filters.

Replace the filter according to the

instructions in this user manual.

Use the PureFlush function if the pure water

dispenser has not been used for 2 days.

Always handle the quartz tube carefully

during cleaning.

Do not use an extension cord to supply

power to the pure water dispenser.

Do not connect the pure water dispenser to

a hot water tap.

Do not connect ordinary tubes or hoses to

the water outlet to collect water from the

pure water dispenser.

Do not open the appliance door while you

are collecting water from the pure water

dispenser.

Do not connect the pure water dispenser

to a drain.

Do not use an expired filter. An expired filter

affects the performance of the pure water

dispenser.

Do not place anything on top of the pure

water dispenser.

Do not hang anything on the tube and mains

cord of the appliance.

Do not use any chemical to disinfect or

clean the pure water dispenser externally or

internally (tubes etc.).

Do not clean any plastic parts in a

dishwasher or boil them.

Do not replace the Philips TUV PLS 9W

lamp with any other ordinary or UV

lamp. This will affect the microbiological

performance of the pure water dispenser

and make it ineffective.

When you replace the UV lamp unit and/or

clean the quartz tube, make sure you place

Advertising