Panasonic AG-HMX100E - Manual (Page 42)

42
Specifications
[OTHER]
TALLY output : D-sub 9-pin, 8 cross points, open-collector
Maximum current: 50 mA or less
Maximum voltage: 35 V DC
GPI input: BNC x 1, make-contact
RS-232C : D-sub 9-pin
Signal Format Supported on the Unit
Format VIDEO SDI HDMI DVI-D DVI-I
NTSC Yes — — — —
PAL Yes — — — —
480/59.94i — Yes — Yes —
480/59.94p — — Yes — —
576/50i — Yes — Yes —
576/50p — — — — —
720/50p — Yes Yes Yes —
720/59.94p — Yes Yes Yes —
1035/59.94i * 1 — Yes — — —
1080/25p over 50i — Yes — — —
1080/29.97p over 59.94i — Yes — — —
1080/50i — Yes Yes Yes —
1080/59.94i — Yes Yes Yes —
* 1 Treated as 1080/59.94i
Format VIDEO SDI HDMI DVI-D DVI-I
640×480(60Hz) — — Yes * 1 — —
1024×768(60Hz) — — — — Yes
1280×768(60Hz) — — — — Yes
1280×1024(60Hz) — — — — Yes
1920×1080(50Hz) — — — — Yes
1920×1080(60Hz) — — — — Yes
* 1 If [HDMI] is selected, the HDMI input signal is output as is from the DVI-D OUT connector, disabling the AV mixer
functions including video switching effects.