Polycom Webcam - Manual (Page 140)

ViewStation EX User Guide
138 www.polycom.com
Configuring SNMP Preferences
SNMP (Simple Network Management Protocol) is a set of protocols
used to manage complex networks. SNMP tells the network if a
device or operation is functioning properly. The ViewStation EX
sends SNMP reports on the following:
❑
Low battery power in the remote control.
❑
System is being powered on after a long time powered off.
❑
Authentication failure—someone is attempting to log in as an
administrator with the wrong password.
❑
Authentication success—someone has logged on successfully as
an administrator.
❑
Call failed for reason other than a busy line.
❑
A user has asked for help from the Technical Assistance Center.
❑
A system is in a telephone or video call.
❑
A telephone or video call has disconnected.
To access the SNMP Setup screen:
Select System Info > Admin Setup > LAN/H.323 > SNMP. The
SNMP Setup
screen appears.
Figure 4-28. SNMP Setup Screen