Polycom Webcam - Manual (Page 313)

Appendix A - Screen Reference
© Polycom, Inc. 2003 311
2. VCR recording is not supported in 3 and 4 monitor
configurations:
to record a videoconference, users need to set
their systems for 2 monitors. VCR recording of images that
appear on the third or fourth monitor is not supported.
VGA Input Calibration
This screen is only visible if a Visual Concert FX unit is connected to
the ViewStation EX system.
To access the VGA Input Calibration screen:
Select System Info > Admin Setup > Video/Camera > VGA Input.
The VGA Input Calibration screen appears:
Figure A-7. VGA Input Calibration Screen
Usually, Visual Concert FX can automatically synchronize with the
PC or laptop. However, there are a few instances when it is
necessary to calibrate Visual Concert FX to the PC using the tools on
this screen.
❑
Phase —This option lets you can calibrate the VGA input by
increasing or decreasing the phase.
❑
Horizontal Position —This option lets you calibrate the VGA
input in the horizontal position by setting the calibration frame
to the left or right.