Planet Technology VRT-401G User Manual
Page 69

Click <Apply Changes> at the bottom of the screen to save the above configurations. You can
now configure other advance sections or start using the router (with the advance settings in place)
Edit Connection
Parameters
Description
Enable Tunnel #
Check this check box to enable this tunnel setting.
Connection Name
The name of this connection.
Note: The “Connection Name” can’t be the same with
other “Connection Name”.
Local Site
You can choose which type of the local site is. It can be
a single site or a subnet.
Remote Site
You can choose which type of the remote site is. It can
be a single site, a subnet, any address, NAT Traversal
any address, or L2TP Client. When you choose single
site or subnet, you must specify the remote IP Address.
Network Management
Choose the key exchange method. It can be IKE or
Manual setting.
Advanced
Press this button for the advanced setting of IKE.
69