Pfaff Embroidery Machines - Manual (Page 9)

3:9
A B C
Pf
aff HD scr
een
Cut jump stitches
Your machine features the automatic function
Cut jump stitches. This function saves you time
trimming after the embroidery is completed.
When Cut jump stitches is selected your machine
will trim the top jump stitch thread and pull the
thread end to the underside of the fabric as you
embroider.
Note: Your machine will also cut the thread after you
have changed to a new color. Hold the thread end when
you start embroidering again, so that you can easily
remove the thread end when cut.
Designs marked with this symbol are
programmed for Cut jump stitches. Jump stitch
trim commands can be added to any design
using the 4D™ Organizer Software, included
with your machine.
Timer
Displays the total sewing and embroidery time of
your machine. Touch the icon to reset the timer.
Automatic thread snips
When selected, the automatic thread snips is
activated. The threads are cut automatically and
the presser foot raises at color changes or when
an embroidery is fi nished. When deselected, no
automatic thread snips will be performed.
Automatic presser foot lift
When selected, the automatic presser foot lift is
activated. The presser foot will raise to pivot height
for example when stopping with the needle in the
down position. When deselected, the presser foot
will stay lowered even if the machine stops with
the needle in down position.
Defragment machine memory
To optimize the sewing and embroidery
performance you sometimes need to do a
defragmentation. When that needs to be done a
pop-up message appears. To defragment your
machine fi rst remove unneccesary fi les then go
to the Machine Settings in the Settings menu and
select Defragment machine memory.
The defragmentation can take up to 45 minutes.