Panasonic TQBH0228 - Manual (Page 10)

10
Using WebBrowser
(cont.)
Enabling JavaScript „
If JavaScript has been set to disable, enable it.
Open <Internet Properties> window. 1
Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option].
Click the [Security] tab and set the security level to [Default Level], or select [Custom 2
Level] and check the [Enable] checkbox under [Active scripting].
Accessing from the WebBrowser
Start up the WebBrowser, and enter the IP address set to the projector. 1
The WebBrowser starts up and the authentication window appears.
http://10.69.104.56
<Top window>
Enter the User name and the Password.
2
Click [OK]. 3
<Monitor information> window appears. (11 page)
The default user name and password settings are as follows: •
User name: user1 (with user authority) / admin1 (administrator authority)
Password: panasonic (lower case)
Administrator authority has full access to the all features. User authority has access to “Status”, “Projector control” and “Change •
password”. (User authority has no access to “Detailed set up”.)
Password used in this page is for accessing the web control window. • (See page 16)
The system locks for several minutes if an incorrect password is entered three times in succession. •
If you initialize the network settings, the password is reset to “panasonic”. Change the password to an appropriate one. •
Make sure the password is as hard to guess as possible. •
Change the password periodically. •
If you have forgotten the password, perform [INITIALIZE] in the projector • ’s NETWORK menu (See page 8), and set a new one
in the “Change password” window of your WebBrowser. (See page 16)
Panasonic Corporation and its affiliated companies never directly ask customers for their password. •
Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.
The Top window may not appear depending on the WebBrowser. In this case start up WebBrowser again, or press the [Ctrl] + [R] •
keys for example to update the screen.
Connection cannot be made while the WebBrowser is set to dial-up network. Cancel the dial-up network setting. •
It may take some moments for WebBrowser to start up. •