Taking pictures using the built-in flash – Panasonic DMC-LC1PP User Manual

Page 45

Advertising
background image

Recording pictures (basic)

45

Taking Pictures Using the Built-in Flash

Preparation
• Set the operational mode dial except for [

]. (P30)

ª To open the flash

Press the [

OPEN] button.

ª To close the flash

Press the flash until it clicks.

• Be sure to close the flash when not in

use.

ª Switching to the appropriate flash

setting

: AUTO

The flash is automatically activated
according to the recording condition.

: AUTO/Red-eye reduction

The flash is automatically activated
according to the recording condition.
It reduces the red-eye phenomenon
(eyes of the subject appear red in

photo flash) by lighting the flash
before the actual recording of the
picture.
Use this when you take pictures of
people in low lighting conditions.

: Forced ON

The flash is activated every time a
picture is recorded.
Use this when your subject is back-lit
or under fluorescent light.

: Forced ON/Red-eye reduction

The flash is activated every time a
picture is recorded.
Simultaneously it reduces the red-eye
phenomenon. Use this when your
subject is back-lit or under fluorescent
light.

: Slow sync.

When you take a picture with a dark
background landscape, it makes the
shutter speed slow when the flash is
activated, so that the dark
background landscape will become
bright.

: Slow sync./Red-eye reduction

When you take a picture with a dark
background landscape, this feature
makes the shutter speed slow when
the flash is activated, so that the dark
background landscape will become
bright. Simultaneously it reduces the
red-eye phenomenon.
Use this when taking pictures of
people with a dark background.

OPEN

1

2

REVIEW

REVIEW

SET

SELECT

LC1PP.book 45 ページ 2004年1月26日 月曜日 午後6時50分

Advertising