Philips TV-Video Combi 14PV460/07 - Manual (Page 6)

EN 6
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
1. 1. Use , or to select the TV chan-
nel which you would like to allocate the
decoder to.
2. 2. Press . The main menu will appear.
3. 3. Use to select 'TUNER SET UP'.
Then press .
4. 4. Use to select 'MANUAL TUNING'.
Then press .
5. 5. Use to select 'DECODER'.
6. 6. Use to select 'ON'
(Decoder switched on).
7. 7. To end, press .
The decoder has now been allocated to this TV
channel.
STATUS/EXIT
B 1
L C K B
B 1
L C K B
B 1
L C K B
MENU
0..9 P- P+
MANUAL TUNING
PROG. P55
CHANNEL 055
→DECODER [OFF]
SKIP [OFF]
SELECT K L CHOOSE B
END=EXIT
How can I switch off the decoder?
Use
to select 'OFF' (Decoder switched
off).
B 1
Manual TV channel search
In some cases it could occur that all of the TV
channels were not found and saved during the
Preparation for use. In this case, the missing or
coded TV channels must be searched for and
stored manually.
1. 1. Press . The main menu will appear.
2. 2. Select 'TUNER SET UP' with and
confirm with .
3. 3. Select 'MANUAL TUNING' with
and confirm with .
4. 4. Select 'PROG.' with . Then press
.
5. 5. With or , select the desired
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press
.
6. 6. Select 'CHANNEL' with , and con-
firm with . Then enter the desired chan-
nel with .
When a channel is found,it will stop searching. If
this is the channel you want, press
. If you
set 'SKIP' on for a channel, this channel will be
ignored when going through the channels with
or .
To search for other TV channels, begin again at
step 4.
7. 7. To end, press . STATUS/EXIT
P– P+
B 1
0..9
B 1
L C K B
B 1
0..9 L C K B
B 1
L C K B
B 1
L C K B
B 1
L C K B
MENU
MANUAL TUNING
→PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SELECT K L CHOOSE B
END=EXIT
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
I don't know the channels for my TV stations In
this case, press
in 'CHANNEL' to start
the automatic channel search. A changing channel
number will appear on the TV screen. Continue the
automatic search until you have found the desired
TV channel.
L C K B
T6310EZ-I(EN).qx3 02.4.10 11:16 AM Page 6