Patriot Products Commercial Antenna Polar Mount - Manual (Page 6)

6
60"
24"
40"
1/2"
4"
3"
3"
40"
14" 18" 40"
14"
18"
4.0” O.D.
Steel Pipe
#4 Rebar in all concrete
pad surfaces
Base Plate
18”x18”x1/2”
4 Typ 1 1/4”
Diam.x24”
BOLT AND TEMPLATE KIT (PT# PRT-BTKPS)
(1) Cardboard template. (to be removed after cement sets)
(4) KP/PIPE MT Foundation Template Straps
(4) 1-1/4x24” Threaded Rod (Bolts)
(8) 1-1/4” Nuts & Washers
Bolt and Template Kit with Pipe (On one skid) = 215 Lbs.
Note: See Foundation Requirements & Specifications above.
In-Ground Mast Foundation
Foundation Requirements & Specifications:
• Steel Mast: Schedule 80, L=120”; 4” O.D.
• Concrete: 3000 psi at 28 days, poured against undistrurbed
soil
(Allow concrete 24 hour set time before installation of
antenna)
• Soil Bearing Capacity > 2000 psf.
• Ground the Antenna to meet applicable local Codes.
60in
min.
48in
60in
5-1/2 OD Pipe
24in OD
Anti-Twist
Weldment
Grade level
Optional Mast Pipe (Prt# PRT-PST400)
with Bolt & Template Kit
4 Anchor Bolts
1 1/4” Diam.
60