Panasonic KX-FP86 - Manual (Page 42)

42
Receiving Faxes
1 When the unit rings, press
or lift the handset to
answer the call.
2 When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press .
3 Replace the handset, if using it.
● The unit will start fax reception.
CONNECTING.....
FAX START
DIGITAL SP-PHONE
Handset
STOP AUTO ANSWER
FAX START DIGITAL SP-PHONE DIGITAL SP-PHONE
Display
To stop receiving
Press .
Friendly reception feature
When you answer a call and hear a fax calling
tone (slow beep), the unit will automatically start
fax reception.
● If this feature is not required, set feature #46 to
“OFF” (p. 66).
STOP
TEL mode !
(answering all calls manually)
If the arrow ( ▼ ) is shown on the right of the
display, turn it off by pressing .
Display:
ON
TEL MODE
AUTO ANSWER
Note:
● If you do not answer the call within 15 rings, the unit
will temporarily activate the answering device.
● Up to 30 sheets of printed paper can be held. Remove
the printed paper before it exceeds 30 sheets.
Fax reception in memory
When a printing problem is detected, the unit will
temporarily store the received document into
memory.
While the document is in memory;
— the display will show an error message and the
following message alternately.
Display:
— slow beeps will sound (memory reception alert).
See feature #44 on page 66.
● Follow the instructions on pages 70 and 71 to
solve the problem.
● For memory capacity, see page 85.
FAX IN MEMORY
Activating the TEL mode
Receiving a fax manually