Panasonic KX-FP86 - Manual (Page 75)

75
Operations
For fax advantage assistance, call 1-800-435-7329.
Answering device
Problem
● The memory is full. Erase unnecessary messages
(p. 55, 59)
● Press the remote operation ID correctly and firmly (p. 58)
Cause & Remedy
New messages cannot be
recorded in the TAD/FAX mode.
I cannot retrieve recorded
messages from a remote
location.
Copying (cont.)
Problem
● The thermal head is dirty. Clean it (p. 80).
● Some paper has instructions recommending which side to
print on. Try turning the paper over. We recommend
smooth paper such as Hammermill
Jet Print for clearer
printing.
● You may have used paper with a cotton and/or fiber
content that is over 20%, such as letterhead or resume
paper. We recommend smooth paper such as
Hammermill
Jet Print for clearer printing. R
R
Cause & Remedy
The copied image is distorted.
The printing quality is poor.
The printing is faint.
A B C
Original Copy
NO.
01 <FAX # NOT AVAIL.>
MODE
RCV
PAGES
01 MEMORY RECEIVE
POWER DOWN AT:Jan. 05 2000 04:30AM
YOUR LOGO :
YOUR FAX NO. :
RESTARTED AT:Jan. 05 2000 04:31AM
FUNCTION OTHER FACSIMILE
<< WARNING >>
CONTENTS HAVE BEEN CLEARED DUE TO POWER DOWN.
FOR ADDITIONAL INFORMATION, PLEASE SEE THE JOURNAL REPORT.
POWER DOWN REPORT
If a power failure occurs !
● The unit will not function.
● Fax transmission and reception will be interrupted.
● If delayed transmission of feature #25 (p. 64) is programmed and the start time has passed
during a power failure, transmission will be attempted soon after power is restored.
● If fax documents are stored in memory, they will be lost. When power is restored, a power
down report will be printed out stating which contents in memory have been erased.
Sample of a power down report