C +4db, Test l, Drcomp – Panasonic SCHT56 User Manual

Page 14: Attenuator tv delay, Hdmi settings, Adjusting speaker output level settings

Advertising
background image

14

RQTX0175

Settings

Output the signal.

Adjust the main
volume.

Select the speaker
channel.

Adjust the level.

Stop the test
signal.

VOL

C +4dB

Press and hold.

Repeat for each speaker channel

C (center), RS (surround right) and LS (surround left) can be adjusted between -6 dB and
+6 dB, with 0 dB being the level of the front speakers. Adjust center and surround output to
the same apparent level of the front speakers.

For SUBW (subwoofer), you can select “SUBW OFF” so there is no output, “SUBW MIN”
for minimum output, a level between 1 and 19, or “SUBW MAX” for maximum output. Adjust
subwoofer output so it is balanced with the front speakers.

Press and hold.

L C R RS LS SUBW

TEST L

VOL

(A/D Attenuator)

Turn the A/D attenuator on if “OVERFLOW” lights frequently
when using 2-channel analog input. The factory setting is OFF.

DRCOMP

(Dynamic range compression)

Change this setting to listen to software recorded with Dolby
Digital at low volume (such as late at night) and maintain audio
clarity. It reduces the peak level in loud scenes without affecting
the sound field.

OFF: The software is played with the original dynamic range (factory setting).
STANDARD: The level recommended by the producer of the software for household

viewing.

MAX: The maximum allowable compression (recommended for night viewing).

Attenuator

TV delay

Delay audio if there appears to be a difference in timing between

audio and pictures. The factory setting is ON.

To reduce standby power consumption.
Choice for turning off the VIERA Link “HDAVI Control

TM

(➡ page 8).


HDMI settings

Standby selection
OFF:
Standby power consumption reduced

(approximately 0.3 W).

Signals from DVD equipment cannot pass

through HDMI connection to the television

when the unit is in standby (➡ page 8).
VIERA Link “HDAVI Control” (➡ page 8)

does not work when the unit is in standby.

ON: Normal standby power consumption

(factory setting)

VIERA Link “HDAVI Control”
OFF:
VIERA Link “HDAVI Control”

is OFF

ON: VIERA Link “HDAVI Control”

is ON (factory setting)

HDMI

STNBY

OFF
ON

CTRL

DRCOMP

OFF

STANDARD

MAX

ATTENUATOR OFF

ON

TV DELAY

OFF

ON

3

2a

2b

Adjusting speaker output level

Settings

Display

Switch on.

SC-HT56P_MP (RQTX0175-2P).indb 14

9/19/2008 12:28:35 PM

Advertising