Pioneer Elite PRO 510HD - Manual (Page 18)

18
<ARB1527>
R L VIDEO
OUTPUT
INPUT 4
S-VIDEO L-AUDIO-R VIDEO
(MONO) S-VIDEO
L R L V R V
Video movie/VCR
Front panel
INPUT jacks
There are 4 sets of inputs for VCR and DVD/LD players. Use
RCA-type pin plug cords (the same as those used in Hi-Fi
systems) for connections. When the audio source to be
connected is monaural, connect the source to the L-(MONO)
jack.
MONITOR OUTPUT jacks
These are used for connecting the monitor to a VCR for
recording, or for linking it to another monitor. These jacks output
the video and audio signals of the source currently selected
by the INPUT SELECTOR. Connect these output jacks to your
VCR's inputs. Connect the VCR's outputs to the monitor's
VIDEO inputs.
S-VIDEO INPUT jacks
• Inputs S-VHS video signals or signals from a DVD/LD player
that has an S-VIDEO output jack.
• When the signal input from the S-VIDEO INPUT jack is output
from the MONITOR OUTPUT jack, the output signal will be
a composite of Y and C.
COMPONENT VIDEO INPUT jack
Inputs three signals – Y, P B (C B ) and P R (C R ) – output from DVD
players and the like.
DVD player, etc. 480 i 15.734 kHz 60 Hz
1080 i 33.75 kHz 60 Hz
Digital tuner, etc.
480 p 31.468 kHz 60 Hz
Horizontal Vertical
Format
frequency frequency
RGB INPUT jack
Inputs five signals – R, G, B, H and V – output from digital
tuners and the like.
NOTES:
• SPLIT screen, FREEZE screen and SEARCH screen functions
cannot be used when 1080i or 480p component signals are input.
• Signals from MONITOR OUTPUT jacks will not be output when
component signals or RGB signals are input.
• The RGB input jack is designed for use in connecting a digital
tuner with RGB signal output, and it should accordingly never
be used for connecting to a personal computer or other device.
Digital tuner 1080 i 33.75 kHz 60 Hz
Horizontal Vertical
Format
frequency frequency
Input format in which images can be received.
Input formats in which images can be received.
CONNECTING VIDEO/AUDIO EQUIPMENT