Panasonic DP-2310 - Manual (Page 58)

58
Function
■ PRINTER SETTINGS
Screen
No.
00 Printer Settings Print Sets the printer status print. Start
● Stop, Start
01 Job Completion Time Sets the job completion time setting. 180
● 1~ 999 sec.
02 Page Protection Compress automatically then print out. Off
● Off, On
03 Error Page Print Sets print the error page. On
● Off, On
04 Spool Function Sets the spool function. On
● Off, On
05 Text Print Prints text page only. On
● Off, On
06 PS Configuration Print Sets the status page print of PS. Start
● Stop, Start
07 Font List Print (PCL) Sets the font list print of PCL. Start
● Stop, Start
08 Font List Print (PS) Sets the font list of PS. Start
● Stop, Start
09 Mailbox Data Holding Sets the automatic holding function of mailbox 7 days
data.
● Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
7 days
10 Delete Mailbox Data Sets delete the mailbox data.∗ Before
● All, Before
11 Print Queue Delete Sets authorization to delete the print queue. Key op.
● Free, Key op. (operator)
12 AppleTalk Zone Name Input an AppleTalk Zone name.∗∗
● Maximum 32 characters
Modes Function
Initial
Setting
01/03
02/03
03/03
For Key Operator
NOTE
● It is necessary to input the Key Operator ID Code before changing items on this page.
∗ Functions except 0 and 11 are available when optional accessories are installed.
∗∗ When function No. 12 is set, cycle the power by turning the Power Switch OFF and ON.