Panasonic DP-2310 - Manual (Page 8)

8
Getting To Know Your Machine
Handling
Toner and Paper
■ Do not look directly at the exposure lamp when copying.
■ Do not turn the power switches Off or open the front cover/right cover during copying.
● Do not drop paper clips or other metal objects into the copier.
■ If you are not going to use the copier for long periods of time, turn OFF
the Power Switch on the Left Side of the machine and wait 10 seconds
then, turn OFF the Main Power Switch on the Back Side of the machine.
■ Store toner, drum and paper in cool areas with low humidity.
● Use high quality 60 - 90 g/m 2 (Sheet Bypass: 55 - 133 g/m 2 ) paper.
● For optimum performance, it is recommended that only Panasonic Brand supplies are used
in the copier.
● Do not unseal toner before use.
● Do not leave bottle opened for prolonged period of time.
● Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorised Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)
Ventilation
■ The copier should be installed in a well-ventilated area to minimize the ozone density in the air.
Installation
■ The copier should not be installed in areas with the following conditions:
● Extremely high or low temperature and humidity.
Ambient conditions Temperature: 10 – 30°C
Relative humidity: 30 – 80 %
● Where temperature and humidity can change rapidly, causing condensation.
● Direct exposure to sunlight.
● Directly in the air conditioning flow.
● In areas of high dust concentration.
● In areas of poor ventilation.
● In areas with chemical fume concentration.
● In areas with extreme vibration.
● With unstable or uneven conditions (floors, etc.).