Pioneer DOUBLE-DIN DVD NAVIGATION SYSTEM AVIC-D2 - Manual (Page 26)

24
Chapte
r
1
Ba
sic Op
eration
NAVI
/A
V
How to view Map View screen
This section describes only the items that are dis-
played on the Map View screen.
➲ Details of the map screen ➞ Page 29
(1) Current location
(2) Distance to the destination
(3) Estimated time of arrival (or travel time to
your destination)
How to listen to a CD
The built-in CD drive in the navigation system
enables you to listen to CDs and MP3/WMA/WAV
discs during navigation.
This section describes how to listen to a CD with
the built-in CD drive.
1
Press the OPEN/CLOSE button.
The LCD panel opens halfway, and the CD
loading slot appears.
2
Insert the CD to the CD loading slot.
The LCD panel closes automatically.
The audio CD set in the navigation system is
played.
❒ Make sure the CD loading slot is empty
before inserting a CD into the slot.
❒ If you cannot insert a disc completely or if
a inserted disc is not recognized, check
that the label side of the disc is up. Also,
press the CD EJECT button to eject the
disc, and check the disc for damage before
inserting the disc again.
❒ If the built-in CD drive does not operate
properly, an error message such as
ERROR-11 may be displayed.
➲ Error messages ➞ Page 122
3
Press the AV button to switch the Audio
screen.
Pressing the AV button switches between the
navigation map screen and the audio screen.
4
Press the VOL (+/–) button to adjust the
volume.
5
Touch the track you want to listen to in
the track list.
The selected track is played.
You can also skip backward or forward to
another track by moving the joystick left or
right. You can also use  or  touch
keys.
❒ If you touch or , you can switch the list
to the next page or the previous page.
(1) (3) (2)
OPEN/CLOSE button
Audio Information
Current track information
Track list