Panasonic KX-TG2631AL - Manual (Page 31)

Programming
31
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*2 KX-TG2632
*3 This tone lets you know when you receive a call while you are on an intercom call. If you
select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the
tone only sounds 2 times.
*4 You can select whether or not key tones are heard when keys are pressed. Includes
confirmation tones and error tones.
*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to “A”.
*6 The recall time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary.
You can access your service provider/telephone company “Call Waiting” service by
having the recall time set at 100 ms, and then follow your service provider/telephone
company “Call Waiting” instructions to operate this service.
*7 This feature allows the unit to automatically adjust the date and time setting when caller
information is received. To use this feature, set the date and time first.
Ringer volume (Handset) { 1}{1} { 1}: Low {2}: Medium
{
3}: <High> {0}: Off
–
Set area code {
0}{4} (page 26) –
Set dial mode {
0}{5}{1} (page 47)
r
Set line mode
*5
{
0}{5}{3}
{
1}: A {2}: <B>
r
Set recall time
*6
{
0}{5}{2}
{
1}: 700ms {2}: 600ms
{
3}: 400ms {4}: 300ms
{ 5}: 250ms {6}: 110ms
{
7}: <100ms> {8}: 90ms
r
Time adjustment
*7
(Caller ID subscribers only)
{
0}{9}
{
1}: <Caller ID[auto]>
{
0}: Manual
r
Voice enhancer {
5}
{
1}: On {0}: <Off> –
Feature Feature
code Setting code System
setting
TG2631AL_2632AL.book Page 31 Monday, February 20, 2006 2:54 PM