Panasonic KX-TG2631AL - Manual (Page 40)

Multi-unit Operation
40
2
Press {OFF}.
L
The outside call rings at the other
handset.
Note:
L
If the paged party does not answer the
call, press {C} to return to the call. If
not answered within 1 minute, the call
will ring at your handset again. If you still
do not answer the call within 4 minutes,
the call will be disconnected.
Answering transferred calls
Press {C} to answer the page.
L
After the paging party disconnects, you
can talk to the outside caller.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
KX-TG2631
1
Handset:
{
MENU} i {0}{0}
2
Base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE
indicator flashes.
L
After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
3
Handset:
Press {OK}, then wait until the handset
beeps.
KX-TG2632
Important:
L If you accidentally assign another
handset’s extension number to the base
unit, the originally assigned handset
stops functioning. Confirm the extension
number of the handset by placing it on
the base unit or charger. Lift the handset
from the charger before registering.
1
Handset:
{
MENU} i {0}{0}
TG2631AL_2632AL.book Page 40 Monday, February 20, 2006 2:54 PM