Philips 105G7 - Manual (Page 18)

3. Press the Menu Key again to select the function that you want to adjust.
4. Press the Up or Down Key to change the settings of the current function.
5. When the OSD window is active, it shows the input signal timing. The "H" stands for
the horizontal frequency and "V" for the vertical frequency.
6. To exit and save, either press the Exit Key, or leave the monitor alone for 10
seconds. If you want to adjust any other function, repeat steps 2-4.
Adjusting the Picture
Icon Adjustment
Contrast Adjusts the contrast between the foreground and
background of the screen image.
Brightness Adjusts the background brightness of the screen
image.
Horizontal
position Moves the screen image to the right or left.
Horizontal size Adjusts screen width.
Vertical position Moves screen image up or down.
Vertical size Adjusts screen height.
ZOOM Adjust the picture's horizontal and vertical size
simultaneously.
Pincushion Straightens the left and right vertical edges of the
display.
Trapezoid Adjusts the width of the top and bottom of the
screen.
Pin-Balance Adjust to compensate the pincushion unbalance.
Parallelogram Adjusts the viewing area when it is tilted left or
right.
Rotation Adjust the picture tilt to horizontal position.