Pioneer PDV-LC10 - Manual (Page 39)

39
En
BEFORE USING
English
Using the Battery
AC power operation
1
Attach the player to the
battery case.
1 Align the guide hole on the rear of the
player with the rear guide on the
battery case.
2 Push in the front part of the player
until it clicks.
2
Connect the DC output plug of
the AC adapter to the DC IN
connector on the rear of the
battery case.
3 Connect the power plug of the
AC adapter to the power
outlet.
4
Set the power switch of the
player to ON.
Now the player can be operated.
CAUTION
• Be sure to use the AC adapter provided
with the player.
• Before inserting or removing the DC
output plug of the AC adapter, always be
sure to set the power switch of the
portable DVD player to OFF.
Notes:
• When both the battery pack and AC
adapter are connected to the battery
case, the battery pack will not be
recharged. In this case, use the battery
charger for recharging the battery pack
(page 36).
• When both the battery pack and AC
adapter are connected to the battery
case, the AC adapter operation is given
the priority. As their simultaneous
connection may increase the equipment
temperature, it is recommended to
remove the battery.
1
2
HOLD ON/OFF
1
2
4
3