Philips 100Hz TV - Manual (Page 11)

11
T he AV4 Input Jacks provide Component Video
Inputs at 1080i, for accessories like a HD
Receiver and Digital DVD Players. Using the
color difference signals (Pb, Pr) and the lumi-
nance (Y) signal will improve color bandwidth
information.
1 Connect the Component (Y, Pb, Pr)
Video OUT jacks from the DVD player
(or similar device) to the (Y, Pb, Pr) AV4
IN(put) jacks on the TV.
2 Connect the red and white AUDIO
CABLES to the AUDIO (left and right)
OUT(put) jacks on the rear of the accesso-
ry device to the Audio (L and R) AV4
IN(put) jacks on the TV.
3 Press the SOURCE SELECT button
on the remote control to display the
SOURCE menu.
4 Press the CURSOR UP or DOWN
button to select the AV3 option.
5 Press the OK button to confirm your
selection. The TV will change to the
AV3 channel.
6 Turn the TV and the DVD (or digital
accessory device) ON.
7 Press the PLAY button on the DVD (or
digital accessory device) to view the pro-
gram on the television.
U
SING THE
AV 4 I
NPUT
J
ACKS
S-VIDEO
OUT OUT OUT
L
R
AUDIO VIDEO COMP VIDEO
Y Pb
Pr
2 1
6
7
AV4
SOUND PICTURE
ACITVE
CONTROL
ZOOM
3
Source
TV
AV1: VCR
AV2: Recorder
AV3: DVD
AV4: HD
SIDE: Camera
4
4
5
JACK PANEL
ON BACK OF TV
JACK PANEL
OF DIGITAL DEVICE SUCH
AS A DVD PLAYER
EQUIPPED WITH
COMPONENT VIDEO
OUTPUTS
Note: If the AV4 channel is tuned and no signal con-
nection present, the screen could jump or flash.
AUDIO IN
(RED/WHITE)
COMPONENT
VIDEO
CABLES