Philips AZ1027/12 - Manual (Page 11)

[
»
] is displayed. (see 4)
To pause CD play, press • .
To resume CD play, press • again.
To stop CD play, press • .
Select a track
1
During play, press / to select a track.
Find a passage within a track
1
During play, press and hold / .
The CD is played at high speed and with reduced volume.
»
2
Release / to resume normal play.
Tip
When search reaches the end of the last track, the CD stops. •
Program play sequence
You can store up to 20 tracks in the desired sequence.
1
In stop mode, press PROG to start to program play sequence.
[PROG] and [00] are displayed.
»
(see 5)
2
Press / to select a track.
3
Press PROG to store the track.
4
Repeat steps 2 to 3 to select and store all tracks.
When all 20 tracks are stored, no more tracks can be selected and
»
the display shows [---].
5
To play program, press .
In stop mode, press • PROG repeatedly to browse stored tracks.
To cancel program, press • twice.
Tip
When program play stops, the Soundmachine returns to normal play. To •
play program again, repeat steps 1 to 5.