Precor CW34864-101 - Manual (Page 14)

Experience Strength™ C-Line Owner’s Manual: Weekly Inspection 11
Weekly Inspection
This section covers the tasks you should perform each week to maintain the
equipment. Perform the following tasks as appropriate for the unit you are
maintaining:
• Condition and deep clean upholstery.
• Clean and lubricate cable rod ends.
• Clean and lubricate guide rods.
• Inspect cables, connections, and tension.
• Inspect cable handle attachments.
• Inspect pulleys.
• Inspect each weight stack and selector pin.
• Inspect and lubricate bearings and bushings.
• Check seat adjustment and test pop pins.
Condition and Deep Clean Upholstery
Condition and deep clean the upholstery weekly with a lanolin-based hand
cleaner or upholstery cleaner.
Important: To clean the upholstery, do not use cleaning products that have any of
these ingredients: solvents, alcohol, ammonia, or petroleum. Use a mild
detergent-based cleaner instead.
Clean and Lubricate Cable Rod Ends
Check cable rod ends to make sure the shoulder bolts are secure. If cable
rod ends are noisy, lubricate them with a silicone spray lubricant. Spray the
lubricant onto the joint where the spherical portion is enclosed in the outer
housing, as shown in the following figure. Wipe off any excess lubricant with
a cloth.
Figure 7: Lubricate cable rod ends with silicone spray lubricant
Important: Do not use petroleum-based lubricants.