Panasonic PT-D7700 - Manual (Page 2)

2
PT-D7700
DLP™-Based Projector
S P E C F I L E
Specifications
Main Unit
Power supply:
North America 120 V AC, 60 Hz
Europe 220 – 240 V AC, 50/60 Hz
Power consumption: 800 W (800 VA) (North America: 12 W during standby mode with fan
stopped, Europe: 15 W during standby mode with fan stopped)
DMD device: Panel size: 0.95˝ diagonal (4:3 aspect ratio)
Display method: DMD (x 3, R/G/B), DLP™ system
Pixels: 1,470,000 (1,400 x 1.050) x 3, total of 4,410,000 pixels
Lens: Optional powered zoom/focus lenses
Lamp: 300 W UHM™ lamps (x 2) (BriteOptic™ Dual Lamp System)
Screen size: 70 – 600 inches diagonally
Brightness : 7,000 lumens (dual lamp, high power mode)
Contrast: 4,000:1 (full on/full off, dynamic iris on)
Resolution: RGB: 1,400 x 1,050 pixels
(1,600 x 1,200 pixels compatible, compression mode)
Video: 560 TV lines
Scanning frequency: RGB: Horizontal: 15 –100 kHz, Vertical: 24 –120 Hz,
Dot clock: 20 –162 MHz
YP B P R (YC B C R ): 480i: f H 15.75 kHz; f V 60 Hz, 576i: f H 15.63 kHz; f V 50 Hz,
480p: f H 31.5 kHz; f V 60 Hz, 576p: f H 31.25 kHz; f V 50 Hz,
720/60p: f H 45 kHz; f V 60 Hz,
1035/60i: f H 33.75 kHz; f V 60 Hz, 1080/60i: f H 33.75 kHz; f V 60 Hz,
1080/50i: f H 28.13 kHz; f V 50 Hz, 1080/25p: f H 28.13 kHz; f V 25 Hz,
1080/24p: f H 27 kHz; f V 24 Hz, 1080/24sF: f H 27 kHz; f V 48 Hz,
1080/30p: f H 33.75 kHz; f V 30 Hz
S-Video/Video: Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz,
(PAL, PAL60, PAL-M, PAL-N, SECAM, NTSC, NTSC4.43)
Optical axis shift*: Horizontal: ±30%, Vertical: ±50%, powered
Keystone correction range: Vertical: ±40° (with the ET-D75LE2)
Terminals: RGB1 IN: BNC x 5
R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 Ω,
HD/VD/SYNC: 1.4 Vp-p – 5.0Vp-p, 75 Ω (positive/negative)
Y, P B , P R : Y: 1.0 p-p, 75 Ω, P
B,/ P R : 0.7 Vp-p, 75 Ω
RGB2 IN: D-sub HD 15-pin x 1
R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 Ω,
HD/VD/SYNC: 75 Ω, TTL (positive/negative polarity)
Y, P B , P R : Y: 1.0 p-p, 75 Ω, P
B,/ P R : 0.7 Vp-p, 75 Ω
VIDEO IN: BNC x 1, 1.0 Vp-p, 75 Ω
VIDEO OUT: BNC x 1, 1.0 Vp-p, 75 Ω, active through
S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 Ω
SERIAL: D-sub 9-pin x 1 (RS-232C/422 compliant) for external controller
REMOTE 1 IN: M3 jack x 1 for wired remote control or link control
REMOTE 1 OUT: M3 jack x 1 for wired remote control or link control
REMOTE 2 IN: D-sub 9-pin x 1 for external contro (parallel)
Optional board slot: x 1
ET-MD77NT
LAN: RJ-45 x 1, 10Base-T/100Base-TX, for network
ET-MD77DV
DIV-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible
EDID1: 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p
EDID2: VGA (640 x 480) Å| U-XGA (1,600 x 1,200)
LAN: RJ-45 x 1, 10Base-T/100Base-TX, for network
ET-MD77SD1
SERIAL IN: BNC x 1
4:2:2 digital serial component signal, SMPTE 259M compliant: 480i, 576i
SERIAL OUT: BNC x 1, active through
LAN: RJ-45 x 1, 10Base-T/100Base-TX, for network
ET-MD77SD3
HD SERIAL IN: BNC x 1
4:2:2 digital serial component signal, SMPTE 259M compliant: 480i, 576i
HD digital serial component signal, SMPTE 292M compliant:
720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p
LAN: RJ-45 x 1, 10Base-T/100Base-TX, for network
As of April 2005
* Shift range is limited during simultaneous horizontal and vertical shifting.