Philips DVP3055V/19 - Manual (Page 19)

English
Before Operation (Continued) - DVD part
19
AUDIO
Each DVD disc has a variety of audio output options. Set
the DVD+VCR’s AUDIO according to the type of audio
system you use.
Dolby Digital / MPEG
Bitstream: Select “Bitstream” if you connected the
DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier
or other equipment with a Dolby Digital decoder or
MPEG decoder.
PCM :
Select when connected to a 2 channel digital
stereo amplifier. DVD discs encoded in Dolby Digital or
MPEG will automatically downmixed to two-channel PCM
audio.
Sample Freq. (Frequency)
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz.When this choice is made,
this unit will automatically convert any 96KHz signals to
48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz
signals, select 96KHz.When this choice is made, this unit
will pass each type of signal through without any further
processing.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However, you
may wish to compress the dynamic range of the audio
output (the difference between the loudest sounds and
the quietest ones).Then, you may listen to a movie at a
lower volume without losing clarity of sound. Set DRC to
On for this effect.
OTHERS
The PBC and Auto Play settings can be changed.
PBC
Set Playback Control (PBC) to On or Off.
On
:Video CDs with PBC are played according to the
PBC.
Off
:Video CDs with PBC are played the same way as
Audio CDs.
Auto Play
You can set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search
a title that playback time is long most and then play back
the title automatically.
On
: Auto Play function is activated.
Off : Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
DVD
VCD 2.0
PBC
Off
Move
Auto Play
OTHERS
On
Select
DVD
DVD
DVD
Dolby Digital
PCM
48kHz
On
Bitstream
MPEG
Sample Freq.
DRC
Move Select
AUDIO