Panasonic SC-PT753 - Manual (Page 24)

RQ
TX00
44
24
C
h
anging the pla
y
e
r settings
Changing the player settings
∫ “ Video” menu
§4 Refer to “Frame still and field still” ( ➜ page 32, Glossary).
∫ “ Audio” menu
§5 When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend
on the performance of this connected equipment.
∫ “ HDMI” menu
∫ “ Display” menu
QUICK SETUP enables successive settings of the items in the shaded area.
TV Aspect
Choose the setting to suit your
television and preference.
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
TV Type
Select to suit the type of television.
≥ Standard (Direct View TV) ≥ CRT Projector ≥ LCD TV/Projector
≥ Projection TV ≥ Plasma TV
Time Delay
When connected with a Plasma
display, adjust if you notice the audio is
out of sync with the video.
≥ 0ms ≥ 20ms ≥ 40ms ≥ 60ms ≥ 80ms ≥ 100ms
Still Mode
Specify the type of picture shown
when paused.
≥ Automatic
≥ Field
§4 : The picture is not blurred, but picture quality is lower.
≥ Frame §4 : Overall quality is high, but the picture may appear blurred.
Black Level Control
Change the black level of the picture if
you connected a television through the
COMPONENT VIDEO OUT terminals.
≥ Lighter: When connected through VIDEO OUT.
≥ Darker: When connected through COMPONENT VIDEO OUT (Y/P
B /P R ).
Dolby Digital § 5 ≥ Bitstream
≥ PCM Select to suit the type of equipment you connected to the HDMI AV OUT terminal.
Select “Bitstream” when the equipment can decode the bitstream (digital form of
5.1-channel data). Otherwise, select “PCM” (audio output is 2-channel).
(If the bitstream is output to the equipment without a decoder, high levels of noise
can be output and may damage your speakers and hearing.)
DTS Digital Surround § 5 ≥ Bitstream
≥ PCM
Dynamic Range Compression ≥ Off
≥ On: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with
Dolby Digital)
Speaker Settings ( ➜ page 25)
Set the delay time for your center and
surround speakers.
≥ Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
≥ Surround (L/R): 0.0/5.0/10.0/15.0 ms
RGB Range
Set “HDMI Color Space” to “RGB”
(
➜ page 22, Picture Menu).
≥ Standard
≥ Enhanced: When the black and white images are not distinct.
Video Mode
(This setting is irrelevant when
connected through the VIDEO OUT
terminal.)
≥ On: When connected through the HDMI AV OUT terminal. Video is output from the HDMI terminal.
Video is also output from the COMPONENT VIDEO OUT terminal, but only in 480i (interlaced).
≥ Off: When connected through the COMPONENT VIDEO OUT terminal. Video is output from the
COMPONENT VIDEO OUT terminal according to the setting of the “Video Output Mode”
(
➜ page 21, Picture Menu). Video is also output from the HDMI AV OUT terminal, but only in 480p
(progressive).
Audio Output ≥ On: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the
connected equipment, audio output may differ from the audio settings of the main unit.)
≥ Off: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of
the main unit.)
EZ Sync ≥ On: The EZ Sync “HDAVI Control” function is available ( ➜ page 26).
≥ Off
Menu Language ≥ English ≥ Français ≥ Español
On-Screen Messages ≥ On ≥ Off
0044En_p14-25.fm Page 24 Thursday, January 4, 2007 10:29 AM