Panasonic SC-PT753 - Manual (Page 9)

RQ
TX00
44
9
Si
mp
le
S
etu
p ∫ Batteries
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control signal sensor ( ➜ page 11), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front of
the unit.
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode
(e.g. VIDEO 1, AV 1, etc.).
≥To change your television’s video input mode, refer to its operating instructions.
≥This remote control can perform some basic television operations (
➜ page 10).
To change these settings later
Select “QUICK SETUP” in the “Others” menu (
➜ page 25).
step 6
Preparing the remote control
R6/LR6, AA
Insert so the poles ( i and j) match those in the remote control.
≥ Do not use rechargeable type batteries.
Press in and lift up.
Replace the cover.
step 7
Performing QUICK SETUP
, , ,
ENTER
SETUP
DVD
RETURN
1 Turn on the unit.
2 Select “DVD/CD”.
3 Show the QUICK SETUP
screen.
4 Follow the messages
and make the settings.
≥Menu Language
≥TV Type
≥TV Aspect
5 Press to finish QUICK
SETUP.
6 Press to exit.
DVD
SETUP
Setup
ENTER RETURN to select and press to return
QUICK SETUP
Select the menu language.
English
Select
Register
RETURN
ENTER
SETUP
Pr
ep
a
ri
ng
th
e
re
m
ot
e
co
ntr
o
l /
P
e
rf
o
rm
ing
Q
U
IC
K
SET
U
P
0044En_p03-13.fm Page 9 Monday, January 29, 2007 2:28 PM