Panasonic KX-TH112 - Manual (Page 41)

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 41
Ringer settings
Ringer volume
Y ^
1
{
MENU} (center of joystick) i f
i {SELECT}
2
“Ringer volume” i {SELECT}
3
Select the desired line.
4
Select the desired volume. (Default:
High)
L
To turn the ringer off, push {V}
repeatedly until “Off ?” is displayed.
5
{
SAVE} i {OFF}
1
{
MENU} i f i {SET}
2
“Ringer volume” i {SET}
3
Select the desired line.
4
Select the desired volume. (Default:
High)
L
To turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5
{
SET} i {STOP}
Note for handset and base unit:
L When the ringer volume is set to off for a
line, “Ringer off” is displayed and the
handset or base unit does not ring for
outside calls received on that line.
Ringer tone
Y ^
You can change the ringer tone heard
when an outside call is received.
Important:
L You can record songs for the handset
ringer tone from an audio device (page
42).
1
{
MENU} (center of joystick) i f
i {SELECT}
2
“Ringer tone” i {SELECT}
3
Select the desired line.
4
Select the desired item. (Default: Line
1: “Tone 1”, Line 2: “Tone 2”) i
{
SAVE} i {OFF}
Note:
L
If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (tone 1 to 3) for the handset ringer
tone. If you select a melody or a song,
you cannot distinguish lines by their
ringers.
L If you select a melody or a song for the
handset ringer tone, the ringer continues
to sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
L
The preset song “Melody 1” in this
product is used with the permission of ©
2005 Speed Crazy.
L
The preset songs “Tone 4”, “Tone 5”,
and “Melody 2” in this product are used
with the permission of © 2006
Copyrights Vision Inc.
1
{ MENU} i f i {SET}
2
“Ringer tone” i {SET}
Handset
Base unit
Handset
Base unit
TH112(e).book Page 41 Tuesday, July 18, 2006 3:54 PM