Panasonic KX-TH112 - Manual (Page 52)

i Answering System
52 For assistance, please visit http://www.panasonic.com/phonehelp
Listening to messages
using the base unit
When new messages have been
recorded, the MESSAGE indicator on the
base unit flashes.
Press {MESSAGE}.
L
The base unit plays new messages
including memo messages.
L
When you have no new messages, the
base unit plays back all messages.
Playing back messages for the desired
line(s)
Press {LINE SELECT} repeatedly to
select the desired line(s), then press
{
MESSAGE}.
Note:
L
After selecting the line(s), memo
messages do not play.
Adjusting the speaker volume
Press {^} or {V} while listening to a
message.
Useful features during playback
^
Repeating a message
Press {<}.
L If pressed within the first 5 seconds of a
message, the previous message will be
played.
Skipping a message
Press {>}.
Pausing a message
Press {STOP}.
L
To resume playback, press
{
MESSAGE}.
L
To stop playback completely, press
{
STOP} again.
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to the message.
Press {SP-PHONE} during playback.
Note:
L To edit the number before calling back,
press {EDIT} to select the desired
format (page 33).
Erasing messages ^
Erasing a message
Press {ERASE} during playback.
Erasing all messages
Press {ERASE} 2 times while the base
unit is not being used.
L
To erase the messages for the desired
line, press {LINE SELECT} repeatedly
to select the desired line(s), then press
{
ERASE} 2 times.
TH112(e).book Page 52 Tuesday, July 18, 2006 3:54 PM