Philips PET742/12 - Manual

TV
AUDIO IN
VIDEO IN
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
1 Slide the POWER switch to the OFF position
(charging of the DVD player only possible in
the power-off mode).
2 Connect the supplied power adaptor cord (or
the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.
➜ The CHR indicator turns red.
➜ When the battery is fully charged, the
indicator turns off.
3 Disconnect the power adaptor cord (or the
car adaptor) when the CHR indicator turns off.
Note:
– You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
Charge your battery 1
Quick start guide
Philips Portable DVD Player PET742
3 OPEN HERE
CHR
1 Open the lid of the player.
2 Slide the POWER switch to ON to switch on
the DVD player.
➜ The
indicator turns on.
3 Slide OPEN 2 on the player.
4 Remove the protective card (if any) and load a
disc with the label side facing up.
5 Close the disc door.
➜ Playback starts automatically. If not, press 2;.
6 To stop playback, press 9.
3 Enjoy (Disc operation)
Note:
During play, you can:
– Swivel the screen of the player to watch for your
convenience.
– Press directly to adjust brightness of screen
backlight to match lighting conditions.
3 Enjoy (AV OUT)
Connecting additional equipment (TV for
example)
1 Connect the AV OUT socket on the set to the
video and audio sockets on a TV as shown
directly.
2 Switch on the TV and set to the correct video-
in channel.
➜ You can consult the owner's manual of
your TV. (If your TV does not have Audio
and Video inputs, you will need to purchase
a RF modulator. Please consult your dealer.)
Printed in China WK0907
White
Red
Yellow
Not
supplied
2 Prepare the remote control
For first time use
Remove the protective tab to activate the
remote control battery.
To replace the battery:
1 Open the battery compartment.
2 Insert 1 CR2025 battery with correct polarity
(+/-) as indicated.
3 Close the battery compartment.
PET742-Eng_QSG.qxd 2/13/09 10:13 Page 1