Philips TDA6111Q - Manual (Page 5)

1995 Feb 07 5
Philips Semiconductors Preliminary specification
Video output amplifier TDA6111Q
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134). Voltages measured with respect to GND (pin 4);
currents as specified in Fig.1; unless otherwise specified.
HANDLING
Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling MOS devices (see
“Handling MOS Devices” ).
QUALITY SPECIFICATION
Quality specification “SNW-FQ-611 part E” is applicable, except for ESD Human body model see Chapter “Limiting
values”, and can be found in the “Quality reference handbook” (ordering number 9398 510 63011).
THERMAL CHARACTERISTICS
Note
1. External heatsink is required.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
DDH
high level supply voltage 0 250 V
V
DDL
low level supply voltage 0 14 V
V
I
input voltage 0 V
DDL
V
V
Idm
differential mode input voltage
−
6 +6 V
V
om
measurement output voltage 0 V
DDL
V
oc
cathode output voltage V
DDL
V
DDH
V
V
fb
feedback output voltage V
DDL
V
DDH
V
I
in
,I
ip
input current 0 1 mA
I
ocsmL
low non-repetitive peak cathode
output current flashover discharge = 100
µ
C 0 5 A
I
ocsmH
high non-repetitive peak cathode
output current flashover discharge = 100 nC 0 10 A
P
tot
total power dissipation 0 4 W
T
stg
storage temperature
−
55 +150
°
C
T
j
junction temperature
−
20 +150
°
C
V
es
electrostatic handling
human body model (HBM)
−
> 1500 V
machine model (MM)
−
> 400 V
SYMBOL PARAMETER VALUE UNIT
R
th j-c
thermal resistance from junction to case (note 1) 12 K/W