Pioneer DVR-660H-S - Manual (Page 58)

Playback 06
58
En
Check the disc packaging for details of the
soundtrack options.
• Change the audio soundtrack.
The current audio language is shown on-
screen and in the front panel display.
• The sound may drop out for a few
seconds when switching soundtracks.
• Some discs feature both Dolby Digital
and DTS soundtracks. There is no analog
audio output when DTS is selected. To
listen to the DTS soundtrack, connect
this recorder to a DTS decoder or AV
amp/receiver with built-in DTS decoder
via the digital output. See Connecting to
an AV amplifier/receiver on page 19 for
connection details.
Switching audio channels
Taiwan and Philippines model:
For HDD 1 and VR mode content that has
both a main and a SAP (Secondary Audio
Programme) audio channel, you can switch
between main (L), SAP (R), or both (L+R).
2
Other:
For HDD 1 and VR mode content recorded
with bilingual audio, you can switch between
left (L) channel, right (R) channel, or both
(L+R).
2
When playing Video CDs and Audio CDs you
can switch between stereo, just the left
channel or just the right channel.
Some Super VCDs have two soundtracks.
With these discs you can switch between the
two soundtracks as well as individual
channels in each.
• Press repeatedly to display/
switch the audio channel.
The audio channel(s) currently playing are
indicated on-screen.
Taiwan and Philippines model:
L+R – Both channels (default)
L – Left/main channel only
R – Right/SAP channel only
Other:
L+R – Both channels (default)
L – Left channel only
R – Right channel only
Stereo – Stereo (default)
1/L – Left channel only
2/R – Right channel only
1 Stereo – Soundtrack 1/Stereo (default)
1 L – Soundtrack 1/Left channel
1 R – Soundtrack 1/Right channel
2 Stereo – Soundtrack 2/Stereo
2 L – Soundtrack 2/Left channel
2 R – Soundtrack 2/Right channel
Switching camera angles
Some DVD-Video discs feature scenes shot
from two or more angles — check the disc
box for details: it should be marked with a
icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the
Note
1 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 115).
2 When playing a dual mono recording/bilingual recording on a VR mode disc, if you are listening to the Dolby
Digital soundtrack via the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby
Digital
 PCM (see Dolby Digital Out on page 112) or listen via the analog outputs if you need to switch the
audio channel.
AUDIO
DVD (VR) DVD-RAM HDD CD Video CD Super VCD
WMA/MP3
AUDIO
HDD DVD (VR) DVD-RAM
CD Video CD WMA/MP3
Super VCD
DVD-Video
DVR660HS_TLT_EN.book 58 ページ ２００８年２月２０日 水曜日 午前１１時３３分