Getting started – Pioneer DVR-LX60D User Manual

Page 35

Advertising
background image

Getting started

35

En

04

recorder needs to be in standby; it will wake
up automatically and download new codes
from the host channel. The next day, try this
setup process again:

• Press

GUIDE

to display the GUIDE

Plus+ screen.

• Press

to highlight the Menu bar, then

use

to reach the Setup area and

select Setup.

• Continue setting up from the start of this

step again.

If your external receiver still doesn’t respond
to the G-LINK controller, please call
customer support and report the brand and
model of your external receiver.

See also

GUIDE Plus+ FAQ and

troubleshooting

on page 48.

5

Identify the host channel for your

country.

The TV listings information available in the
GUIDE Plus+ system is distributed
throughout Europe by selected broadcasters
called

host channels

. It is important that the

host (analog) channel for your country is
correctly identified in order to receive
listings information (EPG download).

Follow

A

,

B

or

C

below depending on your

setup:

A

If you

are not

using an external

receiver, this recorder will automatically
scan all channels for the host channel:

• Leave the recorder in standby overnight

(do

not

leave it switched on).

B

If you

are

using an external receiver,

you need to identify the host channel
from the table below:

• Tune your external receiver to the

appropriate host channel and leave the
receiver on and the recorder in standby
overnight.

C

If you use

both

an external receiver

and this recorder as sources, follow the
instructions above for setting up without
an external receiver. Only if this is
unsuccessful try the external receiver
method.

About EPG download

• EPG data can only be received when the

recorder is in standby. (When not using the
recorder, therefore, please switch it into
standby.) If you’re using an external receiver,
leave this on when EPG data is downloading.

• If you cannot receive any of the host

channels (see the above table) then you
won’t be able to use the GUIDE Plus+
system. In this case do not set the postal
code (or set Country to

Other

) in the

GUIDE Plus+ setup screen. (When
GUIDE Plus+ service starts in your area,
set the postal code again.)

If digital broadcasts start in your area,
please set the

EPG Type Select

setting in

the Initial Setup menu to

Digital EPG

.

Country/
Region

Host
channels

Comments

Austria

Eurosport

Belgium

RTL-TVI

France

Canal+

Analog only

Germany

Eurosport

Italy

MTV

Analog only

Netherlands Eurosport

Spain

Tele 5

Analog only

Switzerland

Eurosport

UK

ITV, Eurosport ITV is analog only. Use

Eurosport if you are a
SKY subscriber and
you no longer have an
analog terrestrial
antenna.

DVRLX60D_WV_EN.book 35 ページ 2007年3月26日 月曜日 午後12時16分

Advertising