Pentair Deck Jet II MagicStream - Manual (Page 2)

Figure 1
Overview
The MagicStream Deck Jet II is designed to be installed in the deck or landscaping surrounding the pool,
spa, fountain, or pond. The Deck Jet’s swivel nozzle (Figure 1) produces a 5/16" stream of water. The
Deck Jet body is equipped with two, 3/16” drain holes to allow water to drain from the cup surrounding the
nozzle into the drain cavity at the base of the body (Figure 1). Be sure to keep the drain holes clear of
debris. To aid in draining, Pentair recommends placing a gravel layer beneath the Deck Jet.
Pentair recommends that each Deck Jet be fitted with a ¾" ball valve to allow flow control for each nozzle.
For installations involving multiple nozzles, we recommend installing a 3-way valve on the main line near the
pump for overall adjustment.
The Deck Jet is designed for a maximum flow rate of 5GPM at 11 ft of head (See table below).
2
Cup
Swivel nozzle
Drain holes
Drain cavity
Deck Jet cover (P/N 590042)
Swivel base
These 2 parts are
contained in the
nozzle kit (P/N
590041
Gallons (US GPM) 3.0 4.0 5.0
Feet of head 3..9 7.9 11.0
Height of jet 3.0 6.6 10.0
Water/Pressure Specifications
Water drains
into gravel layer
Gravel layer