Panasonic DMR-EH50 - Manual (Page 12)

12
RQT8023
Ge
ttin
g
st
a
rte
d
STEP
1
Connection
≥ The equipment connections described are examples.
≥ Before connection, turn off all equipment and read the appropriate operating instructions.
≥ Peripheral equipment and optional cables sold separately unless otherwise indicated.
The connection will allow the video cassette recorder to be used
for playback when this unit is turned off. For optimum operation, it
is recommended that this unit be connected as shown below.
≥ Connection for transferring (dubbing) from video tape ( ➡ 14)
∫ To enjoy even higher fidelity
You can enjoy even higher fidelity, if your television has an
S-VIDEO IN or COMPONENT VIDEO IN terminals. (
➡ 14)
A to M are indexes for Spanish Quick Reference.
∫ Quick Start
This allows you to operate the DVD Recorder soon after turning it
on. The television program list is displayed and the unit is ready to
record to the selected drive (HDD or DVD
§ 1 ) approximately one
second § 2 after turning the unit on.
§ 1 Only if a DVD-RAM is already inserted in the unit.
§ 2 Only when auto start up of the television program list is turned
off (
➡ 29, “Review options” menu).
It may take up to a minute if you want to record to a disc other than
a DVD-RAM, or to make other operations.
∫ When the unit is not to be used for a long time
To save power, unplug it from the household AC outlet. This unit
consumes a small amount of power, even when it is turned off
(approx. 13 W).
∫ Connect the unit directly to the television
If you connect the unit through an AV selector or video cassette
recorder to the television, video signal will be affected by copyright
protection systems and the picture may not be shown correctly.
≥ When connecting to a television with a built-in VCR
Connect to the input terminals on the television side if there are
both television and VCR input terminals.
Connection with a television and video cassette recorder
S VIDEO VIDEO
OUT2O
U T 2
OUT1O U T 1 Y P B P R
COMPONENT COMPONENT
VIDEO VIDEO OUT OUT
(48 480p/ p/48 480i 0i)
AC IN
S VIDEO VIDEO
IN3IN
3
IN1IN
1
VH VHF / UHF UHF
G-LINK LINK
RF RF
I N I N
RF RF
OUT OUT
VIDEO VIDEO VIDEO VIDEO R-AUDIO-L R-AUDIO-L R-AUDIO-L R-AUDIO-L DIGITAL AUDIO OUT DIGITAL AUDIO OUT
(PCM/BITSTREAM) (PCM/BITSTREAM)
OPTICAL OPTICAL
VHF/UHF RF IN
VHF/UHF
RF OUT
AUDIO
R
AUDIO
L
VIDEO
OUT
OUT
AUDIO
R
AUDIO
L
VIDEO
IN
IN
VHF/UHF
RF IN
AUDIO IN
R L VIDEO IN
M RF OUT terminal
The picture and sound signal from this unit does not go through the
RF OUT terminal to the television.
Make sure you connect one of the following terminals on this unit to
the television: the AUDIO/VIDEO OUT terminal, the S-VIDEO OUT
terminal or the COMPONENT VIDEO OUT terminal. If the
television has none of these terminals, consult your local dealer.
Refer to page 15 if the
antenna connector
doesn’t match.
B Television
G Audio/Video cable
E Video cassette recorder
C Red White Yellow
F 75 ≠ coaxial cable
K AC power supply cord
Connect only after all other
connections are complete.
L To household AC outlet
(AC 120 V, 60 Hz)
I To OUT1 or OUT2
J Cooling fan
indicates included accessories.
indicates accessories not included.
D Cable from wall or
antenna signal
C Red White Yellow
H This unit
A
Note that the television program list is not downloaded while
the unit is unplugged.
B Television B Television
H This unit
E VCR
E VCR
H This unit
EH50English.book Page 12 Tuesday, February 1, 2005 6:36 PM