Panasonic DMR-EH50 - Manual (Page 20)

20
RQT8023
Reco
rdin
g
Recording television programs
[HDD]
≥
You can record up to 500 titles on HDD. (When continuously
recording for long durations, titles are automatically divided every 8
hours.)
[RAM] [-R] [-RW‹V›]
≥ You can record up to 99 titles on one disc.
[+R]
≥
You can record up to 49 titles on one disc.
[SD]
≥
It is not possible to record onto a card.
Preparation
≥ Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥ Turn on this unit.
≥ Press [RETURN] to exit the television program list if it is displayed
on the television. To turn off auto start up of the television program
list
➡ 29, “Review options” menu
See also the notes “Before recording” ( ➡ 21).
1
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD indicator lights up on the unit.
2
If you selected the DVD drive
Press [ < OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
≥ Press the button again to close the tray.
≥ When using 8 cm (3 ″ ) DVD-RAM or 8 cm (3 ″ ) DVD-R,
remove the disc from the cartridge.
3
Press [ W X CH] to select the channel.
To select with the numbered buttons:
≥ Select the audio to record ( ➡ 22).
4
Press [REC MODE] to select the
recording mode (XP, SP, LP, or EP).
≥ To record sound using LPCM (XP mode only):
Set “Audio for XP Recording” to “LPCM” in the SETUP menu
(
➡ 56).
5
Press [ ¥ REC] to start recording.
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
≥ You cannot change the channel or recording mode during
recording. You can change the channel or recording mode
while paused; however, the recording will then be as a
separate title.
≥ You can record while the unit is in standby for scheduled recording,
but once the time for the scheduled recording to begin is reached,
any recording taking place will stop and the scheduled recording
will begin.
∫ To pause recording
Press [ ; ].
Press again to restart recording.
You can also press [
¥ REC] to restart.
(Title is not split into separate titles.)
∫ To stop recording
Press [ ∫ ].
≥ From the start to the end of the recording is called one title.
≥[-R] [-RW‹V›] [+R] It takes about 30 seconds for the unit to complete
recording management information after recording finishes.
I N 2 I N 2
C H C H
HDD DVD SD
S VIDEO S VIDEO VIDEO VIDEO L/MONO L/MONO-AUDIO AUDIO-R
OPEN/CLOSE OPEN/CLOSE DRI DRIVE VE SELECT SELECT REC REC POWER
/x1.3
HDD HDD DVD DVD SD SD
1 2 3
4 5 6
7 8 9
FU NC
TIO
N S
TV GUIDE
SC
HE
DU
LE
CH CH
SUB MENU SUB MENU
TO
P
M EN
U
S
DUBBING DUBBING
DVD/TV
DVD POWER
POWER
TV
Í
CH VOLUME
TV/VIDEO INPUT SELECT
AUDIO
F Rec
SETUP
CANCEL
0
VCR Plus+ CM SKIP
SKIP SLOW/SEARCH
STOP STOP PAUSE PAUSE PLAY/x1.3
ENTER ENTER
RETURN RETURN
CREATE CREATE
CHAPTER CHAPTER Info STATUS STATUS
REC REC REC MODE REC MODE ERASE ERASE DISPLAY DISPLAY
PAGE
D IR EC
T
N AV
IG AT OR
TI M
E
SL
IP
PAGE
1
∫
;
5
4
RETURN
3 , 4 , 2 , 1
ENTER
1 ∫ 2
3
5
3
Numbered
buttons
HDD, DVD indicator
Antenna Mode
e.g., 5: [0]
➡ [5]
15: [1] ➡ [5]
CableTV Mode
e.g.,
5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
Insert with the
arrow facing in.
Insert fully so it clicks into place.
Insert label-up. ∫ Cartridge disc
HDD XP SP
LP
EP
DVD
SD
DC CH BS DUB EXT MPEG4 D.MIX D.MIX NET Link DVD AVCD
RWRAM
VR
SDPC
-+
-
HDD REC PLAY
PLAY REC REC
XP
SP
LP
EP
DVD
SD PC
DC CH BS DUB EXT MPEG4 D.MIX NET Link DVD AVCD
RWRAM
VR
SDPC
-+
-
Remaining time on the disc
HDD REC PLAY
PLAY REC
XP
SP
LP
EP
DVD
SD PC
DC CH BS DUB EXT MPEG4 D.MIX NET Link DVD AVCD
RWRAM
VR
SDPC
-+
-
EH50English.book Page 20 Tuesday, February 1, 2005 6:36 PM