Setting date / time (clock set), Setting date/time (clock set) – Panasonic DMC-FZ20PP User Manual
Page 22
Preparation
22
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• When pressing the [MENU] button, the
screen shown in step 2 appears.
• The screen disappears in about
5 seconds. Start from step 1.
1 Select [CLOCK SET] from the
[SETUP] menu. (P24)
2 Set date and time.
•
2/1: Select the desired item.
•
3/4: Set date and time.
3 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
PLEASE SET THE CLOCK
CLOCK SET
MENU
SETUP
2
/
4
BEEP
CLOCK SET
SELECT
LEVEL
3
VOLUME
NO.RESET
SHUTTER
EXIT
MENU
MENU
M/D/Y
DEC
1
1 2004
.
.
10 00
:
CLOCK SET
EXIT
MENU
SET
SELECT
EXIT
10:00
1
DEC.
1
1.2004
MENU
M/D/Y
CLOCK SET
SET
SELECT
FZ20-PP.book 22 ページ 2004年7月6日 火曜日 午後2時6分