Panasonic DMC-FZ20PP - Manual (Page 96)

Connecting to a PC or Printer
96
Connecting to a PC or Printer
Before Connecting with USB Connection Cable
[ : USB MODE]
Select the USB communication system according to the OS of your PC or your printer
before connecting them to the camera with the USB connection cable (supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P24)
1 Select [USB MODE]. 2 Select [PC] or [PictBridge (PTP)].
• When [PC] is selected, the camera is connected in USB Mass Storage communication
system.
• When [PictBridge (PTP)] is selected, the camera is connected to the PTP (Picture
Transfer Protocol) communication system.
PC
HIGHLIGHT OFF
EXIT MENU
USB MODE
RESET
SELECT
SETUP 3 /
4
VIDEO OUT NTSC
SCENE MENU AUTO
MENU
USB MODE
SELECT SET
PictBridge
(PTP)
PC
Devices to be connected
Setting on the
USB mode
PC/OS
Windows ® 2000 Professional, Windows Me,
Windows 98/98 SE or Mac OS X (10.1 or above),
Mac OS 9.x
[PC]
Windows XP Home Edition, Windows XP
Professional or Mac OS X [PC] or [PictBridge
(PTP)]
Printer Printers supporting PictBridge [PictBridge (PTP)]
FZ20-PP.book 96 ページ ２００４年７月６日 火曜日 午後２時６分