Paxar TC6032DBFFUM - Manual (Page 10)

1-6 Introduction
C h e c k i n g C o m m u n i c a t i o n S e t t i n g s
To set up the printer to communicate
♦
the communication parameters must be set.
♦
a communications cable must be connected from your PC to your
printer.
♦
the printer must be in Receive mode.
The following are the correct settings - an asterisk indicates factory-set
defaults.
Parameter Default
Baud Rate: 9600*
Parity: Odd*
Data Bits: 8*
Stop Bits: 1*
Flow Control: Xon/Xoff*