Paxar TC6032DBFFUM - Manual (Page 13)

Introduction 1-9
Key(s) Description (continued)
Fct 3 Set Backlight
Press Enter to turn light Off/On (Esc will abort)
Fct 4 S e t I n p u t M o d e
Set Input Mode:
Manual (enter all data)
Rescan (use the lookup file for all but the k ey field)
Fct 5 Contrast ( Use arrow keys to scroll, Enter to set)
ENERGY<STD> or ENERGY<HIGH>
ESC:BCK ENT:FWD
CONTRST:<+0>
ESC:BCK ENT:TST
TEST? 1=YES (Pressing 1 will print a test label)
ESC:BCK ENT:OK
Fct 6 Recall Data (Must be in data Entry Mode)
Loads data from previous batch into the prompt entries.
Data Entry Modes
There are three data entry modes:
♦
Normal mode – Default. Also called Numeric mode. Press the key to
access what appears on the face of the key (except letters on the
numeric keys— see Shift mode).
♦
Shift mode – Also called Alpha mode. Press Shift to enter letters with
number keys or with Bksp to delete the current line. S appears on the
status line.
♦
Special Key mode – Press the Alt or Fct key (with a number) to
display a special character or perform a specially-defined function. A
or F appears on the status line.